Re: 4.6 Hangs during Shutdown

ggordon · **Joined:** Thu Jun 29, 2006 8:55 pm **Posts:** 200

OK, Peter...here is output of mine with it plugged in before boot.....the pertinet part of it;

ggordon

ata4.00: configured for UDMA/33
ata4: EH complete
scsi 4:0:0:0: Direct-Access IC USB Storage-CFC 322E PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi removable disk sdb
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
scsi 4:0:0:1: Direct-Access IC USB Storage-SMC 322E PQ: 0 ANSI: 0 CCS
scsi 4:0:0:2: Direct-Access IC USB Storage-MMC 322E PQ: 0 ANSI: 0 CCS
scsi 4:0:0:3: Direct-Access IC USB Storage-MSC 322E PQ: 0 ANSI: 0 CCS
kobject_add failed for 4:0:0:0 with -EEXIST, don't try to register things with the same name in the same directory.
[] [] [] [] [] [] [] [] [] [] [] [] =======================
error 1

hyperion · **Posted:** Mon May 28, 2007 4:12 pm

The new kernel is available here for testing : http://download.zenwalk.org/people/jp/packages/

I'm waiting for your feedback

Thanks

JP

prfaasse · **Posted:** Mon May 28, 2007 4:17 pm

It will be a moment before i can test: a kdebuildings build is running at the moment: not the best of times for a reboot

I'll download and run a test when kdebindings either 'blasts' again, or finishes.

I expect a boot with the SD/CompactFlash module connected & not dmesg 'nastyness', combined with a 'clean' shutdown should be enough as test-pattern?

[edit]

test done: works ok for me..

thil · **Posted:** Mon May 28, 2007 7:40 pm

Trying to boot the new kernel 2 times:
zenwalk hang on shutdown 2 time with "md: stopping all md devices."

Reproduce the test with:
- boot with an USB key plug in a NATIVE USB port and then shutdown

The previous kernel doesn't hang with 'native' USB port, just with USB HUB.

The chipset is common
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)

ggordon · **Joined:** Thu Jun 29, 2006 8:55 pm **Posts:** 200

With the patched kernel installed....and the usb card-reader plugged in....it now reboots normally and the 'nasty msg' in dmesg is no longer present, looks like it's fixed.

ggordon

laprjns · **Joined:** Fri Mar 10, 2006 3:52 am **Posts:** 690

Plugged in the multi-card reader, downloaded and installled kernel-2.6.21.2-i486-46.2.tgz, shutdown or reboot 5 times in a row without any hangs. Looks like the new kenel has resolved my problem, but I guess you really didn't need me to confirm it.

Thanks

Rich

Re: 4.6 Hangs during Shutdown

Who is online